450cc mitsu injectors

We may earn a small commission from affiliate links and paid advertisements. Terms

rico2001

Member
anyone know how or what it takes to install 450cc mitsu injectors in a honda. I've search and i can find any good site on installation. I have found sites of people who have done it.
 
Originally posted by pissedoffsol@Oct 28 2002, 05:38 AM
put them in

lol
you need an EF resistor box though

what do you mean? and what is this device?
 
hmm i found something out.

Fuel: Most of the time 440cc injectors are good until low 300s whp. Anymore and 550s are needed. The biggest injector the stock ECU can idle is the 310cc. It will NOT idle 440s! A Zdyne or Hondata is needed to run these injectors.
 
Originally posted by rico2001@Oct 28 2002, 10:32 PM
The biggest injector the stock ECU can idle is the 310cc. It will NOT idle 440s! A Zdyne or Hondata is needed to run these injectors.

Where did you get your info from??? Well thats wrong! The ecu will handle the injectors! Its all a matter of getting a larger fuel pump and a FPR to push enough fuel into the injectors!
 
Back
Top