Z6CRX
übber ɐɾuıu etarip
make sure the speedo cable is plugged into the transmission and cluster and working.
then reset your ecu by pulling the hazard fuse in the fuse box under the hood (10amp) for about 30 seconds(really only needs 10 seconds).
if you still have the light coming up you have another issue. Most likely a loose wire.
then reset your ecu by pulling the hazard fuse in the fuse box under the hood (10amp) for about 30 seconds(really only needs 10 seconds).
if you still have the light coming up you have another issue. Most likely a loose wire.