Good morning all.... I'm writing with a little bit of an attitude thanks to my Mechanic who claims he knew how to do this swap (telling me it would be just 2-3 days), when it's now been 2 weeks, and my car still isn't done. He has re-wired the engine harness to work with the JDM engine to all the sensors, basically everything except a few wires. He is claiming that there are 6 wires coming from the Accord Crank position sensor, and he's trying to figure out which wires they connect to on the h22a distributor. On the crank position sensor there are (2) beige-like wires, (2) white w/blue line wires, (2) light blue wires. On the H22a just 4 wires which is white, blue, green and pink. Out of the 6 from the accord, which wires go to 4 on the h22a distributor? All other wiring is completed. Does this make sense? If so will someone please help me, so I can forward the info to him. If this sounds retarded...then let me know that too. I'm 2 seconds from sending a flat bed over to his shop, and scooping up my accord and the 2 engines, and letting someone else do this.
:unsure:
:unsure: