AEM cold air installation with swap

[stivic]

I have a GSR swap in my 94 civic and I bought a AEM cold air v2 system for my motor and the piping is too big to fit down in the hole above my fender wall, I wonder if thats because I should have ordered the intake to match a civic specification or I'll just have to drill out the hole a little bigger has anyone else came across this problem

 

[UDT]

Originally posted by stivic@Dec 10 2004, 11:05 AM
I have a GSR swap in my 94 civic and I bought a AEM cold air v2 system for my motor and the piping is too big to fit down in the hole above my fender wall, I wonder if thats because I should have ordered the intake to match a civic specification or I'll just have to drill out the hole a little bigger has anyone else came across this problem

[post=430050]Quoted post[/post]​

See the front page of hondaswap

 

[posol]

The v2 is NOT the Hybrid intake. please dont confuse the two. they are much different.

if you need to cut the whole bigger, i dont see why you cant. theres not really any structure rigidity there...