I swapped a b16a into my crx last week all is well but I have a crazy bad shake now.... It goes away when i turn left and comes back when the wheel gets straight then gets twice as bad when i turn right. So I jacked the front of the car up and put it in first gear and let the clutch out. The drivers side tire is going up and down about 6 inches as it turns!!!. So I changed the axle (even tho it was a brand new 90 integ axle) and it seemed to get better but now the shake is coming back!!! wtf would be causing this! The half shaft looks fine and I took the dust caps out like ur supose to. Has anyone else had this problem with this swap??