dj_ag_smuv
Junior Member
Hey guys im in need of a lil help. I just swapped a b16a2 into a 94 ex coupe as I've done this 7 times before it's not an issue until now. It is a jdm engine I got from jhot imports motor is (appears) to be in great shape installation went relatively easy and we test started it before I put my wheels back on and the car ran (rough) for about 30 secs I turned it off and proceeded to put the car back together and put my coilovers on. After putting everything together lowered the car put my coolant and all that stuff in it to road test and NADA it cranks and somewhat acts like it wants to start but it just cranks. I have fuel you can smell it after cranking for a while and I've got spark as I've taken the plug wires out and I see the spark on the valve cover. The only code im throwing is a 6 which is coolant temp code. Ive change the sensor and im still getting the code. Note at first I did get a code 7 which is tps but the wire was loose and I fixed that. Now if you look at the mapping of the tps sensor and the coolant sensor they are junctioned together and Im curious to see if this has something to do with it. Also I have tired the p28 ecu as well as the p30 and both throw the same code. Could this be wiring harness related or something else. If anyone has any info it would be greatly appreciated as I need to get thsi running soon,
Thanks
A.G.
Thanks
A.G.