muzeii
New Member
Hey, i'm still pretty new and i finally got my engine all installed an all my parts have come in.
If you havn't seen my posts, i have a 94 civic hatckback vx, with a 97 Jdm intergra TypeR B-18C. It's an obd2a1 engine that i rewired to obd1. I just got my chipped p28 ecu in the mail.
I tried to start it about ten minutes ago for the first time, but it won't start. Here's my situation:
The starter turns the engine over
I have spark at my wires (tested by removing one wire and seeing if it sparked to a ground)
I have fuel pressure, the gauge on my fuel rail reads at about 40psi when i'm trying to start it.
Checked all fuses
because i have spark i assume i rewired the dizzy right.
I'm looking for my brother's code reader and can't find it (i have a light being thrown), I have a feeling the problem is really simple andi'm over looking something really dumb.
thanks, i have my laptop in the garage and will be working on it for the evening, please give me some pointers!
Any checks that you can come up with at the top of your head would be great.
If you havn't seen my posts, i have a 94 civic hatckback vx, with a 97 Jdm intergra TypeR B-18C. It's an obd2a1 engine that i rewired to obd1. I just got my chipped p28 ecu in the mail.
I tried to start it about ten minutes ago for the first time, but it won't start. Here's my situation:
The starter turns the engine over
I have spark at my wires (tested by removing one wire and seeing if it sparked to a ground)
I have fuel pressure, the gauge on my fuel rail reads at about 40psi when i'm trying to start it.
Checked all fuses
because i have spark i assume i rewired the dizzy right.
I'm looking for my brother's code reader and can't find it (i have a light being thrown), I have a feeling the problem is really simple andi'm over looking something really dumb.
thanks, i have my laptop in the garage and will be working on it for the evening, please give me some pointers!
Any checks that you can come up with at the top of your head would be great.