B-SERIES_BOY
Junior Member
Fisrt off, sorry for posting another "car won't start" post but I can't figure out what to check next. Here goes, I was driving normally, then the tach dropped and it crapped out. Pulled over tried to restart but just cranking (at a normal speed). After I pushed the car about 2 miles, I replaced the coil and while I was there the plugs/wires cause I've had that problem before in other honda(s), same thing. The next day I checked all of the fuses. Everything was fine. Then I changed the ignitor and rotor. Still no spark at the end of the wire. I thought maybe the distributor was burnt so I ordered a new complete dist. I put it in and still nothing. I double checked the dist clips and there connected properly. Along the way I disconnected the negative battery cable and checked the engine grounds(just pulling at strings). I'm not sure what to do next. Maybe the ECU??? Btw, it's an obd1 b18c.