Cel 1 after going turbo

We may earn a small commission from affiliate links and paid advertisements. Terms

92CHB

Senior Member
I keep getting cel 1 after installing my budget turbo set up. I have replaced the sensor and relocated it about 12" from the turbo on the down pipe and i am still getting the cel after driving for about 2-3 minutes or so. I cant figure out how to fix the problem now. Also do i go into some type of "safety" mode with fuel and such with the cel showing?
 
Originally posted by CoreyR@Jun 22 2005, 05:43 PM
are you sure its a 1 and not a 10?

is it a fast blink or is it a kinda long blink?
[post=515401]Quoted post[/post]​

Nope it a quick one...I dont know what else to do? :blink: :angry:
 
Okay i have done a bunch of research and have found nothing to get rid of this cel....anyone have this problem before?
 
Originally posted by B16CRX@Jun 24 2005, 09:06 AM
what ECU you using?
[post=515991]Quoted post[/post]​

Stock P06... with FMU and an intank walbro....i know it sucks but for right now thats all i got :unsure:

My O2 snesor is brand new too
 
Originally posted by pissedoffsol@Jun 24 2005, 03:56 PM
what motor are you boosting, the stock b7?
[post=516162]Quoted post[/post]​

yup
 
Back
Top