I swapped a b 16b on my 1998 civic hatchback, and my B & M EGT guage reads 78 psi, and when I drive the car when it reaches about 2500 rpm it starts to bog down and wont go anymore, I tried everything. The timing on the car is perfect, I have new fuel filter, and a aem fuel regulator. The weird thing is when I tried to adjust the fuel it wont even change the psi, I took off the walbro fuel pump because it was pumping over the 100psi mark on the guage. I know it is something to do with the fuel but I have no other ideas of what to do. I did my swap right because there are no check engine lights and the car starts and goes but the only problem is when I put too much gas it starts to bog down. I took it to a local shop here but they didnt know either. I hope somebody can help me or give me some advice because I dont know where else to turn to. Thank you.