tylonalsnifnfool
Senior Member
What cars would i find this motor in
"DOHC 1.6 Non VTEC, Black valve cover. When people say ZC, this is the engine most of them will be referring to. Rated at roughly 130 hp and 108 ft/lbs. of torque. Very similar to the US Acura Integra for 88-89(D16A1) but with different mounts and head. This engine is called the D16A8 and A9 in European markets. It was available in the Japanese market CRX from 88-91, remained available in a lower end Integra until 93 and is still in use in several models of Land Rovers hatchback in England. So that means there are new ZCs out there but chances of you getting one of the older ones is more likely. This engine will bolt right in, no fabrication of mounts and no wiring problems. If you’re on a budget, you can even use your old si ecu, exhaust manifold and transmission, but these will choke the quoted 130 hp number to less."
"DOHC 1.6 Non VTEC, Black valve cover. When people say ZC, this is the engine most of them will be referring to. Rated at roughly 130 hp and 108 ft/lbs. of torque. Very similar to the US Acura Integra for 88-89(D16A1) but with different mounts and head. This engine is called the D16A8 and A9 in European markets. It was available in the Japanese market CRX from 88-91, remained available in a lower end Integra until 93 and is still in use in several models of Land Rovers hatchback in England. So that means there are new ZCs out there but chances of you getting one of the older ones is more likely. This engine will bolt right in, no fabrication of mounts and no wiring problems. If you’re on a budget, you can even use your old si ecu, exhaust manifold and transmission, but these will choke the quoted 130 hp number to less."