D16Z6 -> ED6 Hatch

[Sofa King Slow]

Bought the engine for $200. Couldn't pass it up, besides, I over-revved the engine in it now. I have a COMPLETE wiring harness (goes all the way to the gauge cluster). I need a tranny, but should I get a 4th gen or 5th gen D-series tranny, because the tranny mounts are so different. Can't I save headache and money by getting the 4th gen tranny? Also, which axles do I use, or does that depend on the tranny i use?

 

[BoogieDown]

get DX/Si spindles and axles if you have a 4spd or HF. Use 4th gen tranny 5th is hydro. use your wireharness for the swap it is much easier.
also use the searh button works wonders

 

[brian11to1]

Dont forget you'll need extra wire to wire in the VTEC Spool Valve