Jayamashey
Junior Member
Need some help with an engine problem.
 
I completed a B16A SIR2 swap in the fall. Everything was running great until the weekend.
 
I drove it about 30 miles (50km) and it ran fine. Then i washed it and sprayed the engine bay down just with the hose. Then some guy came over and test drove it by himself (I am selling).
 
After he got back I started it and the engine is now studdering (especially in lower RPM). It feels like its misfiring and definately underpowered, but I am not getting any codes. When I accelerate in neutral and hit 4000-5000 RPM it makes a terrible noise (almost like loose heatshields), but over is better. It seems to shake/shudder alot in the lower RPMs when gas is given. Idle sounds OK but is a little more rough then normal but doen't have the shudder.
 
Any ideas?
 
BTW: Plugs, wires, dizzy, timing belt, O2 - are all 3 months old and worked well.
	
		
			
		
		
	
				
			I completed a B16A SIR2 swap in the fall. Everything was running great until the weekend.
I drove it about 30 miles (50km) and it ran fine. Then i washed it and sprayed the engine bay down just with the hose. Then some guy came over and test drove it by himself (I am selling).
After he got back I started it and the engine is now studdering (especially in lower RPM). It feels like its misfiring and definately underpowered, but I am not getting any codes. When I accelerate in neutral and hit 4000-5000 RPM it makes a terrible noise (almost like loose heatshields), but over is better. It seems to shake/shudder alot in the lower RPMs when gas is given. Idle sounds OK but is a little more rough then normal but doen't have the shudder.
Any ideas?
BTW: Plugs, wires, dizzy, timing belt, O2 - are all 3 months old and worked well.
			
				Last edited: 
			
		
	
								
								
									
	
		
			
		
		
	
	
	
		
			
		
		
	
								
							
							 
	 
 
		 
 
		 
 
		 
 
		 
 
		