Ok I'm having some issues. I just done a h22a swap in a 96 civic dx coupe(manual trans). It starts up but when I press down on the accelerator it bogs down. Now I'm using a phearable ecu with a h22a base map. The motor is obd2. But I'm using a obd1 harness. The p5m I have makes it run like crap and so does the chipped one. The ks is hooked up, added a resistor box, checked the firing order on the Injectors and dizzy. The dizzy has the big plug so that tells me it's also obd2. The vacuum diagram I used isn't working out. I'm running outta answers quickly.