I got a full bucket of these things at work....
And they are nice and easy to install in various places on the car....
In area's where the normal operational driver/passengers are safe....
But in the area's where bad people should not put their hands.....i.e....THEIVE'S!!!
I will be installing about 20 of these in all the blind spots where car theives will normaly reach their hands in to disconnect hood latches, sterio wires, amps, motor mounts,....ETC.....
So be warned.....I have other items I also plan on installing..... and the car is going to have a warning sticker posted in plain sight.
I'm thinking about also installing a few cans of Mace mounted in the center of the car, with a trip wire mounted to the back of some certain items...so that when the item is pulled, the wire will deploy the mace in a certain area pointed at the position most common for theives to steal the items...
PS...these are used blades, and not new ones. These were going in the trash anyways....hehe...only the tips have a little wear on them for 0.5mm...we use toss them if they doont cut material anymore, and they are mounted to an ultrasonic cutter, so even if they are dull...they still cut like crazy for a while...
The only thing is...I could be booby trappin one car...or all the cars...I won't tell
So if these little blades don't cut up and make the theif think twice about continue-ing his plunder...then he is just too dumb...and should be cut, sprayed, shot at, tortured, hung, and be rid off his physical existance on this planet...
I have been Violated for the last time, and the cool thing is....it's going to get caught on tape this next time...and that tape will be posted.....hehe
Here's a few of the Gerber CarbonFiber/Kevlar cutting blades I mentioned in the last post.....they can be torqued to 30 ft/lbs, surgically sharp, and I'm going to get them a tad bit rusty so if he runs after getting cut...he'll have to get a tetnus shot or have lockjaw. Sorry for the crappy pics...I'm not in a focused mood today.
***WARNING*** I could be serious.....or I could be bluffing...... ***WARNING***
Do not try this at home...I do not want to be held responsible for your actions....only mine. I already know of the possible trouble I can get in for doing this...and you don't. The question you have to ask yourself...Is he sane? :unsure:
Ohh...and I will give the owner of the car the option for me to remove these items or give only him/her a list of where they are located, and to leave them right where they are...installed and ready to bite....if I sell the car/cars....
Or I might just go out and buy a decent car alarm
And they are nice and easy to install in various places on the car....
In area's where the normal operational driver/passengers are safe....
But in the area's where bad people should not put their hands.....i.e....THEIVE'S!!!
I will be installing about 20 of these in all the blind spots where car theives will normaly reach their hands in to disconnect hood latches, sterio wires, amps, motor mounts,....ETC.....
So be warned.....I have other items I also plan on installing..... and the car is going to have a warning sticker posted in plain sight.
I'm thinking about also installing a few cans of Mace mounted in the center of the car, with a trip wire mounted to the back of some certain items...so that when the item is pulled, the wire will deploy the mace in a certain area pointed at the position most common for theives to steal the items...
PS...these are used blades, and not new ones. These were going in the trash anyways....hehe...only the tips have a little wear on them for 0.5mm...we use toss them if they doont cut material anymore, and they are mounted to an ultrasonic cutter, so even if they are dull...they still cut like crazy for a while...
The only thing is...I could be booby trappin one car...or all the cars...I won't tell
So if these little blades don't cut up and make the theif think twice about continue-ing his plunder...then he is just too dumb...and should be cut, sprayed, shot at, tortured, hung, and be rid off his physical existance on this planet...
I have been Violated for the last time, and the cool thing is....it's going to get caught on tape this next time...and that tape will be posted.....hehe
Here's a few of the Gerber CarbonFiber/Kevlar cutting blades I mentioned in the last post.....they can be torqued to 30 ft/lbs, surgically sharp, and I'm going to get them a tad bit rusty so if he runs after getting cut...he'll have to get a tetnus shot or have lockjaw. Sorry for the crappy pics...I'm not in a focused mood today.
***WARNING*** I could be serious.....or I could be bluffing...... ***WARNING***
Do not try this at home...I do not want to be held responsible for your actions....only mine. I already know of the possible trouble I can get in for doing this...and you don't. The question you have to ask yourself...Is he sane? :unsure:
Ohh...and I will give the owner of the car the option for me to remove these items or give only him/her a list of where they are located, and to leave them right where they are...installed and ready to bite....if I sell the car/cars....
Or I might just go out and buy a decent car alarm
Last edited: