manifold swap??

We may earn a small commission from affiliate links and paid advertisements. Terms

skrewthesyst3m

Junior Member
i was wondering, i have a 94 ls integra. can i take the manifold, injectors, and throtle from a gsr and swap in to my b18b1? any gains or loss's. help me...
 
hmmm

interesting theory

i don't have answers for you
but check the cc rate for the injectors... and the mm measurments for the throttle body, that will be a good start...
gonna have to wait for someone else's response regarding the intake and runners...
 
the injectors would be fine, but the GSR manifold with the dual stage runners/butterfly's is no good. Very bad design from honda. You would probably lose HP with that mani.

matt
 
not to mention it wont even bolt up to the LS head. also, i think gsr and ls injectors are the same.
 
the injectors are the same
the manifold will not bolt up to the head
both throttle bodies are 60mm

sell the GSR manifold, injectors, TB, and then buy a skunk2 manifold for the B18B1
 
Back
Top