hondacivicdx92
Hamby
hey blanco, no disrespect but an OBD2 harness can be plug into an exsisting OBD1 harness and with the correct ecu it will work fine. I did a B18B1 swap out of a 98 integra into my 92 civic hatch. I used the motor harness off of the B18 and it plug right into my 92 civic harness and i got a p72 wich is an OBD1 ecu and it fired right up and ran fine, no codes, and didn't run rich or lean. If you really do not think it will work go to honndahawk.net, it is my local honda performance and tunnig shop, and get the number and call and ask for mark, he will tell you that ti will work. also if anyone need any sort of parts look this guy up, he can get about anything