Well I'm selling everything. I'm in so much debt right now, and I need to get this shit paid off.
Everything here made 201whp before the #3 rod bearing spun. Didn't damage any other internals other than the rod and the bearing. Most of the parts listed, except for the tranny and shell, have less than 200 miles on them, and the block/rods/pistons has around 4000.
Everything is OBO
-Low-gloss Silver 89 Civic hatch shell, freshly painted, with Tokico HP struts, Skunk2 springs, Arospeed front & rear camber kit, Skunk2 extended wheelstuds & magnesium lug nuts, VIS hood, Sparco hood pins, and brand new windshield. Clear title. No rust, 102xxx miles - $1200 pending
-93 Integra axles & halfshaft $100
-DSM 450CC injectors $50
-Golden Eagle 86mm sleeved with copper o-ring upgrade B18C1 block w/ LS crank (spun bearing on #3 but no -major damage to crank), no rods or pistons $1000 PENDING
-6 Eagle H-beam LS rods $200
-Ported JDM ITR header $350
-RSR ExMag cat-back exhaust w/ CarSound cat & 2.5" flange for 88-91 Civic/CRX $400
Just about anyone on here should be able to vouch for me...i guess...
Contact info:
William Kitchens
1515 Turtle Creek
Lufkin, TX 75904
Cell: (936)465-3629
william@hondaswap.net
aim: greyfades
yahoo: martini_with_olives
Everything here made 201whp before the #3 rod bearing spun. Didn't damage any other internals other than the rod and the bearing. Most of the parts listed, except for the tranny and shell, have less than 200 miles on them, and the block/rods/pistons has around 4000.
Everything is OBO
-Low-gloss Silver 89 Civic hatch shell, freshly painted, with Tokico HP struts, Skunk2 springs, Arospeed front & rear camber kit, Skunk2 extended wheelstuds & magnesium lug nuts, VIS hood, Sparco hood pins, and brand new windshield. Clear title. No rust, 102xxx miles - $1200 pending
-93 Integra axles & halfshaft $100
-DSM 450CC injectors $50
-Golden Eagle 86mm sleeved with copper o-ring upgrade B18C1 block w/ LS crank (spun bearing on #3 but no -major damage to crank), no rods or pistons $1000 PENDING
-6 Eagle H-beam LS rods $200
-Ported JDM ITR header $350
-RSR ExMag cat-back exhaust w/ CarSound cat & 2.5" flange for 88-91 Civic/CRX $400
Just about anyone on here should be able to vouch for me...i guess...
Contact info:
William Kitchens
1515 Turtle Creek
Lufkin, TX 75904
Cell: (936)465-3629
william@hondaswap.net
aim: greyfades
yahoo: martini_with_olives