Hello,
We have a 91 civic hatch that we turned into a stage rally car. We are doing a mpfi swap using a z6 intake, hi-ohm z6 odb1 injectors, and a PM6 ECU. Here is question 1 concerning the mpfi swap. I understand the wiring needed to be done for the mpfi swap up to wiring the injectors. All the how-tos include the resistor box. Do I wire the hi-ohm injectors in a similar fashion, just taking the resistor box out of the circuits? Here is question 2 concerning the mpfi swap. Is there a how-to for the vacuum line connections? The dpfi has lots of hoses and the mpfi has lots fewer. What goes where?
We had to remove the ignition switch and replace it with a relay and a push-button. The relay is controlled with a toggle and the push button activates the starter relay. Here is question 1 about ignition switch circuits. Does anything from position 1 on the oem ignition switch need to be hooked up or can we just wire up the circuits activated in position 2?
Thanks for your help......
We have a 91 civic hatch that we turned into a stage rally car. We are doing a mpfi swap using a z6 intake, hi-ohm z6 odb1 injectors, and a PM6 ECU. Here is question 1 concerning the mpfi swap. I understand the wiring needed to be done for the mpfi swap up to wiring the injectors. All the how-tos include the resistor box. Do I wire the hi-ohm injectors in a similar fashion, just taking the resistor box out of the circuits? Here is question 2 concerning the mpfi swap. Is there a how-to for the vacuum line connections? The dpfi has lots of hoses and the mpfi has lots fewer. What goes where?
We had to remove the ignition switch and replace it with a relay and a push-button. The relay is controlled with a toggle and the push button activates the starter relay. Here is question 1 about ignition switch circuits. Does anything from position 1 on the oem ignition switch need to be hooked up or can we just wire up the circuits activated in position 2?
Thanks for your help......