TurboRex90
Golden EG
So im going up for a retune on the 27th of this month but im extremely anxious about the numbers ill make. My last tune from a horrrible tuner made me 240whp on 20psi on a cast manifold and 2-1/2" downpipe, and ive heard nothing because extremely good about this new tuner. One of his testimonials was how he made a stock D16Z6 (my motor) make 306hp, with just a turbo and tune and so im hoping to well exceed this.
Im looking for educated guess's, i know its impossible to predict exactly but id still like some opinions.
My Setup:
JDM SOHC D16ZC Block
D16z6 Vtec Head
Skunk 2 pro Intake Manifold
BBS 62mm Throttle Body
Ramhorn Manifold
Turbosmart 38mm Wastegate
.50 trim t3/t4
450cc Injectors
255 Walboro pump
Eagle H-Beam rods
Vitara 8.5:1 Pistons
Fresh hone gaskets/seals etc
3" Downpipe/2-1/2" exhaust
Neptune w/ AEM boost solenoid
If he can get stock internals to break the 300 mark, im aiming to be able to do that easily.
Opinions? ( Estimated range of power is fine i.e 200-300hp etc
Im looking for educated guess's, i know its impossible to predict exactly but id still like some opinions.
My Setup:
JDM SOHC D16ZC Block
D16z6 Vtec Head
Skunk 2 pro Intake Manifold
BBS 62mm Throttle Body
Ramhorn Manifold
Turbosmart 38mm Wastegate
.50 trim t3/t4
450cc Injectors
255 Walboro pump
Eagle H-Beam rods
Vitara 8.5:1 Pistons
Fresh hone gaskets/seals etc
3" Downpipe/2-1/2" exhaust
Neptune w/ AEM boost solenoid
If he can get stock internals to break the 300 mark, im aiming to be able to do that easily.
Opinions? ( Estimated range of power is fine i.e 200-300hp etc
Last edited: