Iv currently removed my F22b-1 sohc vtec engine out of my 97 accord. The H22a donor engine from a 94 prelude is in the accord no worries! was a easy fit, as the chassis come factory SiR....... The problem i have is, all the plugs to the sensors on the left hand side plug up, only have one stray plug, but on the crank side, i have the loom from the ECU with 5 or 6 large multi pin plugs. 1or 2 plugs from h22a engine plug up directly (the wire colors done match) but the rest of the plugs dont. I cant find a wiring diagram for my car anywhere on the net.. Also i have the ENTIRE dash loom from the h22a and the p13 ecu, i found the plugs to meet the engine (same wire colors ofcourse). i would just use this whole loom but id rather not have to wire the whole loom in, i would even know where to start.. Im very much a learner and have no qaulifications on this feild, im solely taking on a challenge. Any help would be great.. this exact conversion has been done plenty according to the net. All the homework iv done prior to swap suggests there are little wiring issues to sort but not from what i see, although im yet to find a exact thread on the same year motor and exact same car.
CHASSIS:
'97 vti cd5 accord
DONOR:
'94 H22a1 - prelude
CHASSIS:
'97 vti cd5 accord
DONOR:
'94 H22a1 - prelude