Recent content by 95preludetypes

i ran high on hc levels on my smog test. i have replaced the o2 sensor i ran a fuel cleaner i tested the egr vlave and the cat is fairly new i am out of ideas should i put a new cat the one i bought is from autozone i dont know if it is any good am not going to pay for a real honda one. I have...

how many feet of header wrap do i need to wrap a dc header for a honda prelude

the cat is new but it is from autozone and the o2 is also new i think the wiring may be wrong its a denso universal

i got a ticket and have to take my car to the state referee... i took my car to get pretested for smog but i failed bad. visualy i am ok. but i ran a 259 on hc when i need to be a 88 or less. i ran ran a 1.05 on co when i need to be at .52. please help me i was considering running the denatured...

thank you but the real problem is that my car didnt pass i was really high on hc and co i was wondering if the cel could lead me to why this was happening

i have had my check engine light come one about two times only in the hottest part of the day with the a/c on. then not reapear when i start my car again. today i jumped the service wire to check the code. but the only thing flashing was the srs light help please i need to pass smog thru the ca...

how many quarts of oil does an lx civic take autozone said 3.5 thanks for your help

on my h22 i want to change from an auto to manule tention what is involed what parts and what is the step by step proceedure thank you so much for your help

I have a 95 lude with an H22 swap and it ran great but now the timing belt tensioner is going out I’ve heard that h22a belts are a bitch so i was wondering if it would be better just to pull the motor to do the belt i would probably do the clutch and flywheel at the same time, thanks

is it bad that my top cam cover on my h22 is missing what can this cause?

i think im just going to have to take it to a shop and get a new timing belt and tensioner. Im going to wait on the clutch i hate the idea but not enough time and space it sucks but what ever. thanks for your time

is it worth pulling my h22a to replace timing belt, tensioner, clutch and flywheel i have never done it but it needs to be done what do you think.

ok so is this something for a novice mechanic I'm very will and I have the tools but I don’t want to mess up parts that are as important as the timing how bad is it to drive it the way it is thank again

Thank you for the fast reply what is involved in converting the tensioner . Has anyone had experience with that thank you?

This is a very hard thing to describe but here it goes. On my H22a my timing belt seems to rattle around a lot at and above idle. When the car is off there is about a 1/2 inch of movement also the belt seems to be shifting to the right of the pulleys. The belt is fairly new and in good...