Yep VTEC Eveytime time noticable at 5k. . . It did the same thing b4 chipping . . Something new though . .
Ok, i found something else out about the problem. . . while the rev limiter is engaging early and while it is bouncing off the limiter i can decrease throttle to half or less and on one...
VTEC Always works, No CEL ever. Got the chip to remove speed governer. Car runs same as b4 i chipped it,. Alittle hesatation around 3-4 grand sometimes. And about 50% of the time the limiter is early. Just like before. I don't know, By the way the jetta was one of those GLIs with the v6 we...
I swaped a JDM H22A into my 92 accord almost 2 years ago. Car runs pretty good, but a few weeks after the swap i noticed since i did the swap only sometimes would i get the car to go past ~6600 rpms. Probably about half the time. So I chiped the P13 ECU that removed the speed governer and moved...
I have a JDM H22A in my 92 accord, at first the company sent me a auto ecu with the manual swap. Then i got them to send me the manu ecu. I have a slightly high idle and fuel cutoff is at about 7000. Is this normal? Maybe i dont have the best ecu for my setup? Top speed is about 112.
I've had the H22 running for a few weeks now, and it runs pretty good. The idle is alittle high and there is a hesatation at 2.5 grand. Also when i open the oil cap with the engine running, air blows out (alot of air). I never saw this with another car and i am not sure if it is normal. I...
On a JDM H22A is the knock sensor the one right below the intake manifold or the one right below the oil filter. The engine is now in and running and ready for the last step (exhaust). Thanks
Yeah i came across this problem also in my swap, my friends garage has fuel line and we are using the banjo adapter and making a custom fuel line. But this is not the least of my worries, i cant fiqure out my wiring.
I am in the middle of a H22A swap and i am trying to wire the motor right now, I am using the accord wireing harness and i have p13 ECU. There is a extra plug that was on the p13 ecu with four wires, (vtec right?) What exactly are they for? Also the lude's harness has some wires in the plugs...
I am in the middle of a H22A swap and i am trying to wire the motor right now, I am using the accord wireing harness and i have p13 ECU. There is a extra plug that was on the p13 ecu with four wires, (vtec right?) What exactly are they for? Also the lude's harness has some wires in the plugs...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.