1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help? CRX tie bar question

Discussion in 'Wheels / Suspension / Tires / Brakes' started by Dustin_m, Nov 4, 2005.

  1. Dustin_m

    Dustin_m Active Member

    Messages:
    4,603
    Likes Received:
    16
    Joined:
    May 21, 2003
    Location:
    San Diego, CA
    so i ordered a set of all 4 strut and tie bars off ebay. they are jsut the generic kind, but whatever. it also came with a 5th bar that is for the interior. now i have never seen one in a CRX, so i think its for an EF hatch, am i right? Also, where do i bolt the lower tie bars on at? i am pretty sure i know, but just want to make sure
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,017
    Likes Received:
    3,947
    Joined:
    Sep 28, 2002
    Location:
    CT
    pics or link?
     
  3. Dustin_m

    Dustin_m Active Member

    Messages:
    4,603
    Likes Received:
    16
    Joined:
    May 21, 2003
    Location:
    San Diego, CA
  4. Dustin_m

    Dustin_m Active Member

    Messages:
    4,603
    Likes Received:
    16
    Joined:
    May 21, 2003
    Location:
    San Diego, CA
    alright we got the lower tie bars on. we are trying to find a place to put the pillar bar. i know its not really for the crx, i guess, but it might help.
     
  5. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,017
    Likes Received:
    3,947
    Joined:
    Sep 28, 2002
    Location:
    CT
  6. Dustin_m

    Dustin_m Active Member

    Messages:
    4,603
    Likes Received:
    16
    Joined:
    May 21, 2003
    Location:
    San Diego, CA
    we were talkin about it and i think we are going to drill and tap a hole in the B pillar. On the hatches, is it the B or C pillar that the bar goes on? anyone know. if its not worth it, then oh well, but i figured its worth a try
     
  7. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    I wouldn't drill into the B pillar to mount the bar. Just leave it off and sell it to someone. :)

    The bars are steel with some kind of black coating, right?
     
  8. Dustin_m

    Dustin_m Active Member

    Messages:
    4,603
    Likes Received:
    16
    Joined:
    May 21, 2003
    Location:
    San Diego, CA
    They're aluminum, with a fake carbon fiber finish
     
Verification:
Draft saved Draft deleted

Share This Page