Ok so recently I put a f23 in my 95 accord, the original engine was a f22b2 SOHC NON-Vtec, this is a SOHC Vtec. When we first finsihed the swap my head gasket blew out 5 minutes down the road and now that thats replaced my car runs like complete shit. First off the motor wont hold an idle it dies when you let off the throttle and when you do give it gas, the check engine light comes on until you let off. Flooring it will get you to about 2500 or 3000 the rpms jump all over and wont pass that. My friend said it was the main relay, so I took it out and resoldered all the points, but that didnt change anything. Also if it makes any difference the distributor that came on the motor is a internal, and since its an obd2 motor and my car is obd1 I couldn't use it so I put the external coil one form my motor on. I got a video if it running for a couple seconds and if anyone could give me a little help on anything that would be awesome!
YouTube - Engine
(Im flooring it btw in the video)
YouTube - Engine
(Im flooring it btw in the video)