I have a chipped p28 and a b16 distributor for sale. The distributor has very low miles on it. The ecu has a b16 map on it for 450cc injectors....I will find my eprom burner and put whatever map you want on it. Wanting 110 for ecu and 120 for distributor + shipping or pickup in upstate SC. I...
Ok, so my b16 let go for the 3rd time and I decided to get a new car. So my friends and I go looking for cars and I find a 2000 mustang gt for 15k. I drove the car and loved it. So I go through the process of buying the car but I dont have any credit and my mom(my cosigner) has a 788 becon...
Today after i had an oil change, i notice a knocking noise coming from the engine. It only knocks when i accelerating. It kinda does it at idle but is very hard to hear. It sounds like it is metal on metal. I have taken my rods out twice. once to put new piston rings on and once to put new...
A friend of mine's 94 accord isn't getting fuel. I just want to know if it is the main relay or fuel pump. If the main relay was bad it wouldnt click at all would it? If it does click but i dont here the fuel pump then it would be the fuel pump right? Is there anything else i could check for...
i recently got done converting my engine back to all motor and had to install a header. It is some POS ebay cheap header and it sounds too buzzy. the rest of my exhaust is 2.5 inch with no cat and magnaflow muffler. Is there a way to eliminate the buzzing or quiet down the exhaust system...
I am planning on putting a set of ctr pistons in my b16, but after doing a little research i find out that you have to shave some of the rod for the ctr pistons to fit. what part do i shave off and how much do i take off? I have also read that the ctr pistons will give me 10.8:1 or 11.1:1 or...
I just got done changing my valve seals and my car smokes really bad but not out of the exhaust. It comes out of the valve cover and it looks like it comes out of the back of the motor too but i can't tell. What could make it smoke like this?
I don't want to take my head off to do this. I was wondering if i put the piston below the valves i am working on at TDC, would i be able to just let the valve fall into the combustion chamber and then pull it back out? I know i need a valve spring compressor, but do i need some other type of...
a while back we determined that my valve seals were worn. I am going to replace them in a week or two but i have a new smoking problem. There is a lot of smoke coming out of my valve cover throught the pcv valve of whatever it is called. Is that just another sign of the valve seals or is it...
I am putting a stock motor and tranny into a 91 integra and the transmission mount bolt holes don't line up at all. It is a cable tranny but i'm not sure witch one it is. Are there mutiple bolt paterns for different integra models. He ordered a mount with the part number 50805-sk7-030 and it...
I need a shift linkage and a transmission mount(5 speed) for a 91 integra gs. Also does anyone know where to get the little metal key for the crank pulley?
I will be chipping a computer for a friend that has a 50 shot on a b16. Just wondering how much should i retard his ignition througout the power band? His fuel will be handled with some type of thing that raises fuel pressure when the he is spraying.
My car has started smoking a lot lately and i think it is either valve guides or bent valves maybe. It doesnt smoke bad unless i let the car sit and idle(or stop at a stop light) for about a minute. After it has been idling and i give it gas then a big puff of white smoke will come out of the...
I have a perfectly good p30 ecu that i took out of my car after putting in a chipped p28. I am low on funds so I'm selling cheap.
115 + shipping
I prefer paypal
I go to leave school today and go to lunch. So i get into my car and try to start it and nothing at all happens..no lights even came on the dash. I get campus security to jump me off and it starts right up. So i am just thinking that the battery somehow died and the alternator will charge it...
On the way home today, my car just shuts off. No warning signs at all.
As i was coasting, i put it in 2nd gear and let the clutch out. The rpm raised to like 4500 but the car still wouldn't start. So i get to a parking lot and try to start and all it does is turn over. I reached over and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.