Then you will possibly need the driver's side mount from a 95 Ex or Si, or the GSR drivers side. (upper mount)
On my Ex i reused the tranny mount, bolted right up, but that was a d16z6.
I used a 98 GSR harness, that way you wont have to change the dizzy, injectors, ot the alternator, and you dont have to hack a harness or 2, and it is wired for VTEC.
There is a Type R harness for sale in the Parts Section of hondaswap, for $125, i'd pick that up if i were you.
You will need the b16a2 shiftlinkage and axles.
If you don't have the axles you can use 94+ integra LS axles.
OH> and welcome to hondaswap
[]
Just to clarify, this is a b16a2 from a 99-00 Civic Si, right?
Not a b16 SIR II?
They have differences.