2000 ek swap NEED HELP

[Babybooyjaay0223]

Okaay so I need a little help I have a 2000 ek I just bought and it’s giving me problems it has a swapped d16y8 vtec motor with a automatic transmission converted to manual. Not sure what computer honestly... it’s just a Frankenstein... I have a bad idling issue and I’ve swapped out the intake manifold and fuel injectors, hoses etc. I still have a vacuum leak and the idling problem I’m new to all this swap stuff so I need some help

 

[Babybooyjaay0223]

Ex**

 

[Briansol]

the vac leak is likely the source of your idle issues. Get a thing of bubbles and try to find where it's leaking from by applying the bubbles to the hoses.

Amazon product ASIN B092QMXFHN

 

[TurboMirage]

that and/or dish soap in a spray bottle

 

[dilbeckskate]

id bet my bottom dollar CEL is on , id start there

 

[Babybooyjaay0223]

I had the leaks when I got the car and I’ve already fixed em but nothing I changed the fuel injectors, iacv, the whole intake module ,fuel rod all that stuff I’ve changed but I still can’t get it

 

[Babybooyjaay0223]

id bet my bottom dollar CEL is on , id start there

Cel is on and flashing

 

[Briansol]

pull the codes. it will help point you in the right direction?

Honda ECU Error Codes

Honda ECU Error Codes Here's a handy chart for pulling your ECU codes. Pulling the code is a fairly easy process. For 92+ Honda's and 94+ Acura's: Before you can start reading the CEL (check engine light) in your dash, you need to 'jump' your ecu. Locate the factory two-pin connector of...

hondaswap.com