B16a2 Axles

We may earn a small commission from affiliate links and paid advertisements. Terms

simonc

Member
Hi all,
Just transplanted a B16a2 from a 99 Civic Si into our 1993 EG hatch. Does anyone know what axles we should use with this motor?? Thanks
 
while we are on the topic of axels!!

what AXLES ARE THOSE FROM IN THE PICTURE?

:unsure:

IMG_0378.jpg
 
yea, if you can, try to get axles coming off of the same engine, if not, go with what sol said and get integ axles.

good luck!
 
Originally posted by bossman032@Feb 24 2003, 11:58 PM
while we are on the topic of axels!!

what AXLES ARE THOSE FROM IN THE PICTURE?

:unsure:


Almost positive the green bands are from a LS.
 
Originally posted by 92b16vx+Feb 24 2003, 10:25 PM-->
bossman032
@Feb 24 2003, 11:58 PM
while we are on the topic of axels!!

what AXLES ARE THOSE FROM IN THE PICTURE?

:unsure:


Almost positive the green bands are from a LS.

thanks 92b16vx!!

Looks like you are back!!! :worthy:

This will THE AXELS work for my 91 DX doing a SIR II SWAP WITH CABLE TRANNY AND OBD1 ECU..

I know the requirements for the SWAP!!!

Just need a conformation that those axels will work with my DX 4th GEN doing a SIR II SWAP?

THANKS :)
 
Originally posted by bossman032@Feb 25 2003, 07:31 AM

This will THE AXELS work for my 91 DX doing a SIR II SWAP WITH CABLE TRANNY AND OBD1 ECU..

I know the requirements for the SWAP!!!

Just need a conformation that those axels will work with my DX 4th GEN doing a SIR II SWAP?

THANKS :)

I want to say for the 4th gens you want to use earlier teg axles pre 94.So if those are from a earlier teg you should be good.
 
Originally posted by simonc@Feb 25 2003, 11:30 AM
Thanks Guys!
Because the engine is from an EK civic, will the axles fit our EG shape??

You should be good.
 
Just to clarify a point regarding Integra axles, can we use the axles from any model Integra, including Type R? What engines came in the 94+ Integras?
 
yup 99-00si axels I just did the same swap or 94 and up gsr anymore quetion feel free to ask +
 
Thanks Poot. I assume you should use the halfshaft from the 99Si as well?
Do you know if axles from a JDM SiR EG civic will fit??
 
Back
Top