I recently got my project car 92 civic VX, and ran into my first problem. the ecu was cut out, and they didnt include the connector. i tried to splice connectors from a cx/dx but there is about 6 wires that are unable to connect .i connected all i could and tried to start it, and no go, i dont think spark was there . 4 of the wires are in a shielded cable and 2 individual. my car is at the garage but i think they where white/black,orange black, and the shielded cable (blue i think) 4 conductor
so far i cant find one thing on what to do. ive looked everywhere. i cant even find a new harness.
also a few of the wires where the same colors? do the go to the same locations. there is a brown single conductor shielded cable comming from the dx connector that has nowhere to connect to on the car harness as well.
any help would be great, i need this car running fast so i can start the modifications
if no wiring info then the part number on the VX harness would be nice
so far i cant find one thing on what to do. ive looked everywhere. i cant even find a new harness.
also a few of the wires where the same colors? do the go to the same locations. there is a brown single conductor shielded cable comming from the dx connector that has nowhere to connect to on the car harness as well.
any help would be great, i need this car running fast so i can start the modifications
if no wiring info then the part number on the VX harness would be nice