Brad's Build

[BigJ]

Solid. Those exedy's are awesome.

 

[GlassHeadlights]

Solid. Those exedy's are awesome.

So I might have something a bit special on my hands?

 

[Luis998]

So I might have something a bit special on my hands?

You do have something special on your hands.

 

[GlassHeadlights]

You do have something special on your hands.

Sick!! My VTAK will be grippin' off the clock!!

 

[GlassHeadlights]

Well I just ordered my chipped P28 off eBay 5 mins ago. Its actually a converted P06 but for $140 shipped its actually really good, and does the same thing.

Here it is:

ODB1 P28 P72 P30 P75 ECU VTEC Chipped Integra Civic - (eBay.ca item 280286982525 end time 25-Nov-08 21:11:52 EST)

 

[GlassHeadlights]

The guy chipped my ECU to a P28 base then tuned the fuel and timing a tad.

Does this sound right to you? Just curious.

 

[GlassHeadlights]

Today I rebuilt my seat. The drivers seat wasn't ripped but the bolster was flattened. I finally figured out some fat guy broke off the metal support bar.

What I ended up doing was taking my divers seat and my dads seat (his was ripped but good boulster) and making one good seat.

What I started with:

Ripped but good boulster:

Not ripped but flat boulster:

Semi apart:

One seat apart:

The part that broke on my seat and made it go flat. I'm going to weld it at school.

The good seat frame off of my dads car:

Both seats apart:

One good seat back togther:

Finished in the car:

It feels 10 times better. It also makes my car feel like a little race car.

 

[GlassHeadlights]

I had to put the 14" winter rims on my moms Accord so I got her 17"s for the winter. Don't think I'm going to use them for a mili-second. I'm getting Integra 15"s. My car doesn't leave out two acre propery so I thought what the hell. I don't think they rub but they sure raise up my car an inch or two. I already notice going down the driveway it is more rigid.

 

[GlassHeadlights]

Hey I have a question.

When everything is apart and I'm hot tanking it I will have to take off the VTEC solenoid. I've heard you can strip down the soleniod pretty good then could I hot tank it? Not the solenoild part but the bottom part.

Just by looking at it I think the pressure switch will come off then the top half (solenoid) will come off then can it be hot tanked?

 

[efhondakid]

There are three (3) 10mm nuts that go into the head, take those out, they hold the VTEACH solenoid and pressusre switch onto the head.

 

[GlassHeadlights]

Thanks.

 

[efhondakid]

 

[GlassHeadlights]

Gotcha.

 

[GlassHeadlights]

I got my chipped P06 in the mail today.

Its just as I expected. Its chipped to a P28 base then I think the guy said he added a bit more fuel for the extra compression on Crome.

The guy also gave me a DVD disc with Crome and Uberdata on it.

The only place I think I can get my car tuned close to me is a local place called Zensport.

Zensport Ltd.::High performance tuning specialists::.

This weekend my dad and I might slap on the head temporarly and see how it runs before we rebuild it. (I'm useing my dads block when I rebuild it because its getting old and tired.)

 

[OGMatt]

Hey your did you get a new camera or did you just find some settings because when I used your camera it was all complicated?

 

[GlassHeadlights]

Hey your did you get a new camera or did you just find some settings because when I used your camera it was all complicated?

Instead of useing the gay-ass flash that makes every picture look dumb I used a small pot light.

 

[OGMatt]

Dope it looks 10x better!

 

[HATCHET_HONDA]

I just found out I have a Exedy clutch. Funny how that happens eh.

It doesn't look any different that stock so I'm guessing its a stage 1 clutch. I'm still going to use it vs. the stock clutch. I have the matching pressure plate too. I also have a re-surfaced flywheel with 8000 miles on it. This is all going on my Mini-Me swap.

ewww... man save yourself some trouble and put in a brand new clutch kit.

 

[efhondakid]

I got my chipped P06 in the mail today.

Its just as I expected. Its chipped to a P28 base then I think the guy said he added a bit more fuel for the extra compression on Crome.

The guy also gave me a DVD disc with Crome and Uberdata on it.

The only place I think I can get my car tuned close to me is a local place called Zensport.

Zensport Ltd.::High performance tuning specialists::.

Get an emulator and tune it yourself! Its not that hard, Ive never seen Crome so I dont know how easy it is to use but me and my friend Jason tuned his LSVTEC monster on Hondata ourselves.

 

[GlassHeadlights]

ewww... man save yourself some trouble and put in a brand new clutch kit.

Theres nothing wrong with it. Its a month old. I'm not buying a new one. Sure its a bit rusty but that brushes off.