gumbalia420
New Member
i got a zc dohc 1.6 and am putting it in my 90 rex, i beleive it is a vtec, but how do i read the stamp on the engine to know exactly what i have? can anyone help me with this issue! Thank you for any info!
We may earn a small commission from affiliate links and paid advertisements. Terms
you just need to take the 2 wires that you added before and cut them/depin them or whatever and extend them to the CYLinder sensor - the one that goes to the blue/yellow on the distributor goes to the blue/yellow on the green plug on the CYL sensor and the one to the blue/green on the distributor goes to the blue/green on the CYL sensorok, it is going into a dx but, i did a swapbefore to a sohc zc d16a? so will it already be wired for that, i know we added two more wires to the dizzy? from a five wire to a seven wire! will i still need to add more wires or is it going to work? Thanks for all your help! hows colo? i moved to florida from ft collins three years ago, and man do i miss that place!!
could be the 84-87 DOHC ZC from 1st gen JDM CRX Si and 3rd gen JDM Civic Si - they do not have the I.D. on the front of the block - it is on the top rear of the block just above the starter hole - looks like this: (notice the block number just below the I.D. number - it is PG6 - the 88-95 is PM7)I going to buy a ZC doch and the ZC in the block where in said the name of the engine and serial number the engine does not have anything written in there I can buy the engine or not?