CrixSi91
Junior Member
Ok guys here is what I have and what has been done. To start with the car is a 91 hatch Dx with the Z6 engine already in. We bought the car just like that. There was no engine harness or anything. I took a harness off another Dx in the junk yard. We wired it up to the Z6 engine changing and moving plugs as need. Then I add the 4 wires from the ECU. The 2 for the distributor and the 2 for the injectors. I also did away with the resistor cuz we are using 0bd2 injectors. We have a ECU jumper harness and we are using the p28 ECU. I did the mpfi to the stock harness and then pluged that into the jumper harness. Everything is hooked up but we are not getting any spark. We have power the distributor but no spark at the plugs. Does anyone have any ideas on what might be worng? If you have any other advice on this swap it will be greatly appriciated. Thanks.