i have gathered all my turbo kit and it is ready to go on i have:-
b16a2
9.01 cp pistons/crower rods
revhad manifold/external 38mm tial
t3/t4e .60 trim
custom 2.5" piping 27"x6.5"x3" intercooler
greddy bov-apexi intake
flamenco-t oil kit
3" dp+apexi n1 exhaust
255lph walbro
now heres where the mission arrives after doing all this i have become on a low budget i have around $500 i need to tune it up i know the options i have are
*vafc with injectors
*hondata
*uberdata.
if i use the vafc with injectors what boost will i be good for what injectors will i need will 440cc do
If i go hondata can i chip the ecu myself and then get it tuned if so what will the chip contain? boost etc?? how much will this work out
Finally if i go uberdata can i chip the ecu myself and how does it work with boost and fuel settings etc
I would appreciate any help i have searched the past posts and w/o any luck and i am tired of searching i hoping to gain around 350whp
Here at hondaswap is where my turbo dreams started would appreciate if you could help me finish THANKS
b16a2
9.01 cp pistons/crower rods
revhad manifold/external 38mm tial
t3/t4e .60 trim
custom 2.5" piping 27"x6.5"x3" intercooler
greddy bov-apexi intake
flamenco-t oil kit
3" dp+apexi n1 exhaust
255lph walbro
now heres where the mission arrives after doing all this i have become on a low budget i have around $500 i need to tune it up i know the options i have are
*vafc with injectors
*hondata
*uberdata.
if i use the vafc with injectors what boost will i be good for what injectors will i need will 440cc do
If i go hondata can i chip the ecu myself and then get it tuned if so what will the chip contain? boost etc?? how much will this work out
Finally if i go uberdata can i chip the ecu myself and how does it work with boost and fuel settings etc
I would appreciate any help i have searched the past posts and w/o any luck and i am tired of searching i hoping to gain around 350whp
Here at hondaswap is where my turbo dreams started would appreciate if you could help me finish THANKS