VROOM_PSHHH
New Member
Alright guys... I've owned one boosted car before (91 CRX Si w/boosted GSR)... That car was CRZY fast... Now I've got a new project because I'm a daddy... I bought a 92 four door Honda Accord... I have big dreams for this car... I'm currently looking for a H22 motor that isn't running because I plan on ripping the internals out and replacing anyway... I am building this motor to put 500+ hp to the wheels with the help of a turbo... I plan on driving this car daily with by turning down the boost, and going to the track every so often and pump up the boost...Now I know what I want out of this motor, but because I bought that CRX and didn't build it, I don't know where to even start... While I'm building this motor I am also working on the suspension aspect of my project... I'm getting Suspension Techniques front/rear sway bar to replace the factory sway bar... A guy on CB7tuner makes strut braces... I'm swapping over to 5 lug with bigger discs/calipers in the front and rear... Now, I'm planning on building the block first with new crank, rods, pistons... Then move to the head... Is there a particular company that you would recommend? I know that I'm going to need to probably port and sleeve the block... Is there a crank/rods that are better for the stress that this motor is going to be put under?
Now I don't want anyone posting on here that it's a waste of time/money to build such a powerful motor for street use, because a buddy of mine has a 9 sec Prelude that he drives to church... I'm not trying to "one up" him in anyway...
If anyone has any info that could help me out, please let me know... If there is anyone in the Tri-state area that can do some machining for me cheaper than a shop let me know and I'll drive to you... I really appreciate everything in advance... Thanks guys...
Kenny
Now I don't want anyone posting on here that it's a waste of time/money to build such a powerful motor for street use, because a buddy of mine has a 9 sec Prelude that he drives to church... I'm not trying to "one up" him in anyway...
If anyone has any info that could help me out, please let me know... If there is anyone in the Tri-state area that can do some machining for me cheaper than a shop let me know and I'll drive to you... I really appreciate everything in advance... Thanks guys...
Kenny