i have a certain amount of money saved up .... so i have plans in the very near future to start fixing up an EK (00) hatch ....
90% of the money will be going toward performance mods...exterior/show mods will be a little (CF hood, lowered, rims, EXTREMELY MILD IF NOT STOCK body kit) .....
so right now im in the planning stages ...
i have an idea of what the final outcome should be like .... i would like to be pushing 300HP@wheels, yet i would like it to be reliable (so another words, i would like it to have the potential of 300-350HP, but more driving around 200-250HP, so basically just keeping the PSI down) ....
also, what OBD issues will i run into?
so far, i have a list of what i would need and need to be done:
00 Civic Hatch CX
Engine Swap (99-00 Si, GSR, or B20/Vtec, or what? ... another thread here)
Turbo
Wastegate
3" Blow Off Valve
3" cat back - Tanabe Racing Medallion
high-flow cat (or none at all?)
downpipe
Intercooler
Sleeves?
Upgraded Lower Compression Pistons
Connecting Rods?
Cam Gears - AEM
Pulley System - AEM
Some Head Work
Head Swap (depending on which swap i decide to go with above?)
Upgraded Ignition System - MSD
Upgraded Fuel Rail - AEM
Fuel Filter - AEM
Fuel Pressure Regulator - AEM
Injectors
Fuel Pump - AEM
Upgraded Clutch
Lightened Flywheel
LSD
A/F Gauge
Turbo Timer - HKS
StandAlone System/Hondata - AEM or Hondata
Boost Controller -HKS
i know there has to be more ... i just cant think of any .. help guys?
also, what suggestions do you have for specific companies to use (AEM, Greddy, etc) ....
90% of the money will be going toward performance mods...exterior/show mods will be a little (CF hood, lowered, rims, EXTREMELY MILD IF NOT STOCK body kit) .....
so right now im in the planning stages ...
i have an idea of what the final outcome should be like .... i would like to be pushing 300HP@wheels, yet i would like it to be reliable (so another words, i would like it to have the potential of 300-350HP, but more driving around 200-250HP, so basically just keeping the PSI down) ....
also, what OBD issues will i run into?
so far, i have a list of what i would need and need to be done:
00 Civic Hatch CX
Engine Swap (99-00 Si, GSR, or B20/Vtec, or what? ... another thread here)
Turbo
Wastegate
3" Blow Off Valve
3" cat back - Tanabe Racing Medallion
high-flow cat (or none at all?)
downpipe
Intercooler
Sleeves?
Upgraded Lower Compression Pistons
Connecting Rods?
Cam Gears - AEM
Pulley System - AEM
Some Head Work
Head Swap (depending on which swap i decide to go with above?)
Upgraded Ignition System - MSD
Upgraded Fuel Rail - AEM
Fuel Filter - AEM
Fuel Pressure Regulator - AEM
Injectors
Fuel Pump - AEM
Upgraded Clutch
Lightened Flywheel
LSD
A/F Gauge
Turbo Timer - HKS
StandAlone System/Hondata - AEM or Hondata
Boost Controller -HKS
i know there has to be more ... i just cant think of any .. help guys?
also, what suggestions do you have for specific companies to use (AEM, Greddy, etc) ....