WELL WELL WELL after about 6 months of "taking a break" from turbo hondas, i got that damn itch again. i started stumbling on sick deals, and i had some loot and went for it. since the deals were so good. i decided to shoot for 400whp on a 1500 dollar setup inlcuding the built motor and turbo kit. so far i am way below budget.
here she is, the filled b16a block. just got done pouring it.
the goods needed to fill your block, total cost, 40 dollars. ( i get the devcon for a sick discount through work)
motor on stand, leveled to perfection, cleaned, sanded and ready for salt.
look at the precision leveling products., yup thats the haynes Xtreme civic manual...
thats about all its good for, that and a good laugh
the salt poured and meausred using my mad sicc hacksaw blade.
and last but not least, just about a full pound of devcon later, the finished product. tomorrow i will update with the coolant holes drilled and the salt flushed.
COOLANT HOLES HAVE BEEN DRILLED AND THE SALT WAS FLUSHED. all i have to do now is the final curing, by baking the block for 4 hrs at 200 degrees f
here she is, the filled b16a block. just got done pouring it.
the goods needed to fill your block, total cost, 40 dollars. ( i get the devcon for a sick discount through work)
motor on stand, leveled to perfection, cleaned, sanded and ready for salt.
look at the precision leveling products., yup thats the haynes Xtreme civic manual...
thats about all its good for, that and a good laugh
the salt poured and meausred using my mad sicc hacksaw blade.
and last but not least, just about a full pound of devcon later, the finished product. tomorrow i will update with the coolant holes drilled and the salt flushed.
COOLANT HOLES HAVE BEEN DRILLED AND THE SALT WAS FLUSHED. all i have to do now is the final curing, by baking the block for 4 hrs at 200 degrees f