I am about to buy a new intake manifold for my b18b. I was looking at skunk2, is there any other brands i should look at? Also is the manifold a simple bolt on or is there some other stuff that has to be done at the same time?
Ben
Ben
We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by sohcslammer@Nov 17 2004, 09:43 AM
I would run the AEBS manifold then. The JG isn't necessarilly for FI but it does work better on a high reving motor. I think the AEBS/Profesional Products manifold is much better than ther skunk 2 for 1/2 the price though...
[post=418204]Quoted post[/post]
Originally posted by integraslut78+Nov 17 2004, 01:05 PM-->sohcslammer@Nov 17 2004, 09:43 AM
I would run the AEBS manifold then. The JG isn't necessarilly for FI but it does work better on a high reving motor. I think the AEBS/Profesional Products manifold is much better than ther skunk 2 for 1/2 the price though...
[post=418204]Quoted post[/post]
Hey dummy AEBS does not make an intake manifold for a B18B1 or for a B18C1 for that matter. They only have them for B16 and the B18C5.
[post=418236]Quoted post[/post]
Originally posted by integraslut78@Nov 17 2004, 01:05 PM
Hey dummy AEBS does not make an intake manifold for a B18B1 or for a B18C1 for that matter. They only have them for B16 and the B18C5.
[post=418236]Quoted post[/post]
Originally posted by nfn15037+Nov 17 2004, 01:46 PM-->integraslut78@Nov 17 2004, 01:05 PM
Hey dummy AEBS does not make an intake manifold for a B18B1 or for a B18C1 for that matter. They only have them for B16 and the B18C5.
[post=418236]Quoted post[/post]
Hey dummy, the B18A/B is the same flange as the ITR/B16.
For a B18A, I would go with a used ITR manifold. Cheap and flows great.
[post=418358]Quoted post[/post]
Originally posted by integraslut78+Nov 17 2004, 03:53 PM-->Originally posted by nfn15037@Nov 17 2004, 01:46 PM
integraslut78@Nov 17 2004, 01:05 PM
Hey dummy AEBS does not make an intake manifold for a B18B1 or for a B18C1 for that matter. They only have them for B16 and the B18C5.
[post=418236]Quoted post[/post]
Hey dummy, the B18A/B is the same flange as the ITR/B16.
For a B18A, I would go with a used ITR manifold. Cheap and flows great.
[post=418358]Quoted post[/post]
I was told by AEBS that they did not have a IM that would fit a B18B1 Sorry gosh.
I know sohcslammer I grew up with him thats why I called him dummy but I do not know you so you do not have to call me that. Thanks.
[post=418362]Quoted post[/post]
Originally posted by integraslut78@Nov 17 2004, 05:18 PM
I will remember that around your Birthday when is it????? hahahahahahaha
[post=418387]Quoted post[/post]