We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by scottp11@Jul 12 2005, 10:13 PM
That's why I wanna use it...
I saw an article awhile ago about how to make this work, does anyone have a link to this?
P.S. I called it a "cap bridge" because acuraautomotiveparts.org calls it that. I thought it was called a crank girdle too.
[post=525122]Quoted post[/post]
Originally posted by nfn15037@Jul 12 2005, 11:40 PM
All you have to do to make it work is get the main caps from a GSR/ITR block and install them w/the girdle and have it align bored.
[post=525207]Quoted post[/post]
Originally posted by hybrid89@Jul 14 2005, 03:01 PM
nobody has mentioned that if you choose to use a girdle you MUST use..
ITR/GSR oil pan, windage tray and oil pickup...on either OEM or aftermarket girdles.
so add that into the budget if you wanna go that route.
matt
[post=526200]Quoted post[/post]
Originally posted by brian11to1+Jul 14 2005, 03:07 PM-->hybrid89@Jul 14 2005, 03:01 PM
nobody has mentioned that if you choose to use a girdle you MUST use..
ITR/GSR oil pan, windage tray and oil pickup...on either OEM or aftermarket girdles.
so add that into the budget if you wanna go that route.
matt
[post=526200]Quoted post[/post]
nice info.
[post=526204]Quoted post[/post]