itr pistons

We may earn a small commission from affiliate links and paid advertisements. Terms

Insanevtec99

Junior Member
ican get fairly new itr pistons for $150.00 to put into my b16a2 . would it be worth my time and effort??
 
No, it won't be worth it. Better pistons, but not worth it.

Only thing thats worth it is aftermarket pistons, or CTR pistons.

Jeff
 
right, but an overall higher c/r right? so in theory it would produce more power. Not alot, but some.

in a gsr motor -

usdm itr -10.8
jdm itr -11.3
b16 - i can't remember, 10.0 i think
 
no.

putting itr pistons in a b16 will LOWER the compression.

the pistons have a smaller dome, and thus, make less compression
 
Well, what the fuck. Those are alot cheaper than the itrs I had in my car. and mine were only 10.8:1. Wish I had known that.... Are you noobs paying atention? :p j/k

Dude, that calculator is sick. good hookup. so ctr pistons in a b20/vtec with a b16 head, stock deck height, stock head gasket is 13.0:1 c/r ...... wow.... B)
 
yes, but they dont fit the rods. lol

b16a/ls/b20 pistsons and rods will interchage
gsr/itr/ctr pistons and rods will interchange
 
they will work on the b16 or ls rods you just have to have them machined down a bit so they fit because the rods are a little thicker on the b16 and ls. a machine shop can get them to work
 
Originally posted by sohcslammer@Apr 9 2004, 03:27 AM
But doesn't wild Bill have ctr pistons on LS rods?????

nope, JDM b16 p30 sir2 on ls rods.

and that hatch was sold last october. lol
 
Back
Top