what is the best rod to use in a B16 to get more compression without having to go all out crazy like crower, and rods that you dont have to do any machining to make work.
LS rods are the only Honda rods that would fit the B16 crank, the problem is they would put the pistons through the cylinder head. Without some serious machine work you are stuck with B16 rods.
what about a b17 crank in a b16 does this require any machining, what other factory rod and piston combo can i use to get some more compression, i want to go with all factory honda parts.
you can put the b17 crank in a b16 with no problem, use the b17 rods, then put some CTR pistons and you'll be around 11.6:1 CR with a b16 that is 1.7L and all factory honda parts
hmotorsonline has vtr pistons for 180.00 w/out rings, so figure another 100 or so for rings so 289.00 is good too, but i already have a set of total seal, even though i have had bad experiences with em' too much blow by??!!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.