this swap will be going into my 90 si. what do i need to do to convert from obd0 and run this engine in my car. i have got a jumper harness all ready to convert to obd 1 but what ecu injectors and dizzy should i be using?
when i did b20 in my 90 integra i ran all obdo with integra ecu ,injector,and everything you can probably just run all obd1 but thats whatever you prefer.
you could just chip an ECU and run it obd1 since you already have the harness...Gives you a chance to tune it. P28 or any other obd1 ecu should work for you...
yeah i just did b20 vtec and i converted everything to obd1 to be able to tune so the best route is obd1 and if your just running non vtec you can find a ecu from a 92-95 integra and that would work and like he said you can get it chipped and tune and run so much better.and i was told you can run obdo injectors with obd1 dont hold me to it but if you want to run obd1 you will need to do somthing with your resister box.
well im planning on leaving it non-vtec for a while so i need p74 or p28 and 92-95 teg dizzy and injectors if i want to run obd1. i have been told i can use the stock b20 dizzy and injectors and switch clips.
Any OBD1 ECU that has a "chip" in it can be tuned with whatever base maps you want...If I am not mistaken, there are a few in the For Sale section...They pop up all the time...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.