bakerderek0
Up a Creek...
I found this when I was checking out my valve train:
Shot with HTC Touch Diamond P3700 at 2010-04-06
Shot with HTC Touch Diamond P3700 at 2010-04-06
As you can see, both cams are worn, more severe is the intake cam. Both cams have a small amount of movement when seated in the journals. I think this maybe my power loss issue. My car has no power at all. It has a hard time backing up the slope on my driveway and just driving up the street, thats with the ignition timing fully advanced, it doesn't have any power unless I advance the timing. Before you ask, here are the steps I've taken to fix the problem:
New dizzy cap & rotor, spark plugs & wires. throttle body cleaning. The idle also surge( my iacv is good, no FITV, TPS is good, No vacuum leaks).
Do you think these cams are my problem?
Shot with HTC Touch Diamond P3700 at 2010-04-06
Shot with HTC Touch Diamond P3700 at 2010-04-06
As you can see, both cams are worn, more severe is the intake cam. Both cams have a small amount of movement when seated in the journals. I think this maybe my power loss issue. My car has no power at all. It has a hard time backing up the slope on my driveway and just driving up the street, thats with the ignition timing fully advanced, it doesn't have any power unless I advance the timing. Before you ask, here are the steps I've taken to fix the problem:
New dizzy cap & rotor, spark plugs & wires. throttle body cleaning. The idle also surge( my iacv is good, no FITV, TPS is good, No vacuum leaks).
Do you think these cams are my problem?