Originally posted by insanecivic93@Mar 19 2004, 10:57 PM
right, sorry. yes it turns over. it even ran, but let me explain. when the motor came in the distributor was broke in shipping. now this isnt my 1st swap , but it is the 1st zc. anyway, when i put the motor in i decided to find the angle for the 1.5 (d-15) distrib. to run. that wasnt hard and it ran great, but i couldnt bolt it down cuase it was the wrong one and it was all crooked, but i could hold it on and it ran fine. so the company i orderd it from has a warranty on it and sent me a new distrib. and it got here and didnt work. so i figured maybe the ecu so i orderd the zc ecu (p-29) and it still dont work. so now here i am thinking ive got some oddball wiring harness??? i dont know... i did look at the ecu list on this site and it says my cx should have a p-05 and it had a p-09 and my wiring harness looks different than my freinds cx ( same year ) it has wires in the connectors that mine dosent have. it does spark and it gets fuel you can smell it, its got to be a wiring problem to the sensors in the distrib. i dont know...sorry its so long but thats everything , any ideas guys?