Type R Swap

We may earn a small commission from affiliate links and paid advertisements. Terms

turbodx

Junior Member
What parts do I need to complete this swap.
I'm getting everything except the shift linkage and the axels :ph34r:
 
It's the same as any other B series motor,and you need the shiftlinkage and axles.
 
you'll need to convert to obd2. add a 4 wire o2 sensor if you've got a cx or vx model. add wires for vtec and the obd conversion. and 92b16vx is right, you're gonna need the shift linkage as well as the axles.
 
Originally posted by kylemarhx@Feb 12 2003, 04:42 AM
you'll need to convert to obd2. add a 4 wire o2 sensor if you've got a cx or vx model. add wires for vtec and the obd conversion. and 92b16vx is right, you're gonna need the shift linkage as well as the axles.

Instead of converting it to OBD2, you can run a chiped OBD1 ECU and stock wiring harnesses.
 
Originally posted by pissedoffsol@Feb 13 2003, 02:22 AM
jdm integra type R's are PLUGGED for obd2, but are really still obd1

Meaning what?

(kinda dont follow)

To get that thing in i dont know a 95 sol si (frost white of course) Do i just use my stock wire harnesses and a Chiped ecu?
 
TURBODX, I love it when I hear people going with an R-spec motor. Post some pics when you're done. Good luck.
 
Back
Top