Search results for query: *

Didnt anyone read why the valve cover is there or did everyone just look at the pics. It was there because they sent it like that. In the picture I saw before I bought it it looked like the stock one but blue. But when it got here it was that. I am waiting for the new one. I also put the stock...

hello I finished my swap. Click on the link for a mods list and pictures. Please post your opinions in the guest book. Wether good or bad I will leave them for everyone to see. AS LONG AS THERE IS NO FOUL LANGUAGE. FOUL LANGUAGE WILL BE DELETED. My Civic Swap

Hello. I have a 97 b18b1 in my 94 civic. Everything is done except the reverse lights. Can you help. I am using a 97 integra engine 94 civic dx with the 94 civic dx engine harness. And a 91 intergra cable tranny. There are 2 wires for the reverse lights. 1 is yellow and the other is green with a...

Thanks alot but I bought a new one 60 bucks at autozone.

Hello. I am looking for a 02 sensor for a obd1 civic..Let me know what you got and how much shipped to Saugerties, NY I would prefer to pay with paypal so that way I can have it quicker..

Hello. I have a 94 civic with a 97 integra engine. I am using a obd1 pr4 ecu and the stock civic wire harness..Can I use the stock civic 02 Sensor???Thanks

Hi. My temp gauge broke so I bought a new one.. But it is numerical. What is the numerical temp for a 97 integra b18b1. At what degree should I get worried? Thanks

Hi. I am using a 91 integra cable tranny with a 97 integra engine in my 94 civic. Got the whole swap done. But I am trying to figure out the reverse lights. There are 2 unused wires on the tranny bottom. I know that they are for the reverse. Where do I hook them up..?Thanks

Ok. So I went down into the basement where all my spare parts are. And guess what I found. The Big washer that goes on it to hold the belt in its position...POOOOOOP :( That Stinks.

The belt is very tight.. So I dont think that , that is the problem. I will check the pully thicknesses.

Ok. I am down to my last few problems. I need answers for this and my timing question. I Put a 97 b18b1 in my 94 civic dx. It runs. There is a blck can on the firewall. Says OVC on it..I know that the small hose goes to the sensor on the top of the Intake manifold. But there is a little bit...

Hello. I got my Swap running. I ave only started it for a few minutes as there is still some stuff that needs finishing. But when I started it I noticed that the Timing belt slipps off the Cam gears. I push it on and when I start the car it Slides over the side just alittle..Not very much at...

Wanted to share this just in case you ever find yourself here. I put in my swap and got it all done. B18B1 in a 94 Civic. So I turn the key and nothing. Shoot. I go out and try to figure it out. The starter is making a clicking noise when I turn the key. But it wouldnt turn the car over. So I...

That was the same problem I had. bought a braket from ebay. Didnt work. So I ordered the hasport one. Got it, it looked 100% the same. But it fit perfect. I am guessing the other one was bent.

I cant figure this out. I am trying to use the b18b1 (97) wire harness in my 94 civic. Nothing matches, Dizzy, Injectors, Alt, 02 sensor. Plus there is a mess of plugs that arent being used. Do you think it would be easier to use my civic harness? What would I have to modify to use it? I plugged...

Please read all and help. Sorry for such a long post but I need help. Hello. I am put the 97 b18b1 engine in my 94 civic using a 91 cable tranny. Well now I am trying to put the wire harness for the 97 b18 in the car. Everyone says just use the 97 one and it plugs right in at the shock towers...

Ok. When you put a cable transmission into your hydro car and use a conversion kit. Wich I did figure out how to do. The cable tranny has a cable spedometer. So how do you make your speo work? I did try to search for this one but came up empty handed. Thanks Also it has two hoses that comes out...

I did read thoose dorections before posting but I dont understand them. Also I called them and the guy knew less than I did. :( Also very little english.

OK. I am pulling my hair out. I am putting the cable transmission into the car now. and I cant figure out how this thing works. It is the avid racing conversion set. All it is, is 4 bolts 4 nuts a mount a bracket and a heavy peice of metal (small square) with a hole in it. I dont know what I am...

No I am using obd1 But the engine was from a obd2. There is a little map sensor that goes to the canister from my D series engine. Should I use that sensor? Or should I use the one that is mounted to the top of the manifold?