I just got my car back from the mechanics because I couldn't pass emissions. It does now but I also had him look into a problem I had with a irratic idle where it would go from 500rpms to 1500 rpms back and forth till the car was warmed up all the way IE sitting for 5 min before driving. My...
I've been having a oil leak coming out of the Vtec solenoid and found out its not the seal. I've also failed emissions and if I don't let the car warm up for 5 mins I will have an idle issue were it goes from 500 rpm to 1500 rpm back and forth when I stop. I've dropped it off at the mechanic...
I've looked everywhere and can only find an answer to one of my questions. I have a check engine light in my 91 si just swaped b16a1. The LED is reading 2 long blinks and 1 short. The two long is for an O2 sensor but I cant find the 1 short blink anyone know what it is?
I am getting ready to buy a B16a1 engine swap and I had the guy send me the compression and leak down numbers from japan. The leak down is at 9% and the compression is 205 +/- 5 or 10 per cylinder. Are these numbers good? Or should I look elsewhere? Thx
I am getting ready to install a B16 in a 91 Civic Si. Years eariler, I scrapped a 90 DA and took out the ls swap and other items. I bought no name mounts, CTR underdrive pulley, and a no name ceramic header. I was going to put it into my CRX but lost interest in doing the swap. I traded the...
I've looked everywhere and I cannot find how much to cut off of a DA linkage for a B16 swap I am putting into my 91 civic si. I do understand there is wielding involved, and its not a problem. I just cant see in spending $150 for a linkage when I can wield it myself. Thank you in advance for...
That is great. I will have about 1500 to 2000 to do this swap and I want to install a pulley, headers and intake. I am guessing adding a 20-30 HP. Any other suggestions for bolt on type stuff I should consider getting before putting it back in?
Well, I am going through a quart a week of oil in my 1991 Civic SI and I am thinking on getting a JDM motor. I like the Hp of the ZC SOHC motor with a almost just drop in installation. I've seen them with just motor for sale. Will my SI tranny fit the ZC engine? If so, is there anything I...
Yeah, my bad, its a B16A6 I was looking at. As far as the swap, could I just put in the A6 motor and plug it into my current wiring harness? Or will I need to add more wires? I have a D15B2 in there now.
Hello. I just bought my first Honda car. Its a 1990 Crx Ex 5 speed. The engine is toast. I've been reading many forums and trying to decide what engine to put into my Crx.
I have a buddy who is a certified Honda tech who will be helping me, and teaching me how to work on hondas. From what I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.