Search results for query: *

  1. N

    Head swap

    Thanks guys/gals!
  2. N

    CEL question

    When I put the jumper wire in the systems diagnostics connector, should my CEL light come on? Mine isn't and a couple of things I've read on here seem to indicate that it should. My SRS light flashes but not the CEL.....
  3. N

    Noob ignition timing question

    Thanks but I knew it needed to be warm. I just checked it when I first started it up and it was at 16 deg. After warming up though when I went to adjust it I retarded it all the way back and it was way off with my light :( Helms manual was helpful and will try messing with my timing belt...
  4. N

    Noob ignition timing question

    OK. So I did as CAFROG said to do. When the engine was cold it was right on my 16 degree mark. After it warmed to correct temp it was only at about 5 degrees BTDC after I adjusted the distributor as far as it would turn. I am at a loss now as to what to do. Going to read the Helms manual...
  5. N

    Noob ignition timing question

    Thanks, dj. I get all that but I can't turn my distributor any more in the direction it needs to go. That's why I was wondering if somehow my timing belt is off a tooth or two...
  6. N

    Noob ignition timing question

    Thanks CAFROG. Finally found a sound with a Helms download. Appreciate the feedback!
  7. N

    Noob ignition timing question

    Recently replaced the timing belt on my D15B7 and also did the head gasket since it was blown. I just want to clarify that when I put the timing belt on that the TDC mark on the crankshaft pulley is supposed to point at the mark on the timing belt cover and the cam marks should be "UP" and the...
  8. N

    Head swap

    Thanks dj. Do you have any idea how I could confirm this?
  9. N

    Head swap

    I have a 1990 Civic DX Hatch that I haven't driven in years because I was having bottom engine issues. However, I have been driving a 1995 Civic LX and would like to rebuild the top end but I can't have my car out of service for more than a day or two. My question is, does anyone know if the...
  10. N

    Cam allignment?

    Well I turned the distributor all of the way to one side to get it running better but it's still not quite right. Guess I will pull the timing belt and see if that's the problem :P
  11. N

    Cam allignment?

    I recently (after following a walkthrough on these forums) replaced my headgasket. Since putting it all back together I have a serious issue with power when I first push the accelerator down. It bogs way down and if I don't feather the throttle it seems like it won't increase engine RPM's at...
  12. N

    Gasket sealant....

    Thanks E Solsi!!! Just got home from work and going to go to town on it!
  13. N

    Gasket sealant....

    Please someone? My manual does not mention RTV gasket sealant for the head gasket and I need to put this thing back together after work......Thanks in advance!
  14. N

    Gasket sealant....

    D15B7 btw......
  15. N

    Gasket sealant....

    Do I need to use gasket sealant on my head gasket? I would think so, but the manual isn't very clear on this.....
  16. N

    Head Gasket

    Thanks for the tip. I ended up having to take it off to get to some kind of sensor that was in the head underneath of the distributor housing. Now to figure out how to best clean the gunk off of the head.....
  17. N

    Head Gasket

    I have a '95 Civic with the 1.5-16v engine. I just replaced the water pump/timing belt (had fun with crankshaft pulley bolt!). I've had a major loss of power and overheating/coolant loss issues for the last couple of weeks. I know for a fact the water pump was leaking, hence the coolant loss...
  18. Try your Search on Google

Back
Top