newtohondas
Junior Member
Message to all you B16 heads out there. I have been on various sites trying to get some ideas and finally came up with a formula that I like. Tell me what you think.
Here are some basics of the motor. everything except is stock bore. Ihave did my calculations and should get somewhere between 8.0:1 to 8.5:1 cr with this setup.
Of course nothing but race gas
1.b16 block sleeved
2.forged ls piston
3.built LS head (not a big fan of Vtec)
4.450 injectors
5.Custom t3/t4 (no magazine stuff this way)
6.fmic
7.crower rods
Here are some basics of the motor. everything except is stock bore. Ihave did my calculations and should get somewhere between 8.0:1 to 8.5:1 cr with this setup.
Of course nothing but race gas
1.b16 block sleeved
2.forged ls piston
3.built LS head (not a big fan of Vtec)
4.450 injectors
5.Custom t3/t4 (no magazine stuff this way)
6.fmic
7.crower rods