Search results for query: *

So i replaced the cap, rotor, and plugs. I also took it to a shop for them to check the timing. They said it was right on. My motor still bogs and doesn't have the power it should on acceleration. Any more suggestions. The motor isnt throwing any codes. I have the stock 94 civic ex exhaust on...

autozone told me .052, i believe you more though

One more question, do you guys know what the gap is for the spark plugs. Thanks for all your help, you two have been great.

Which color mark on the crank is 16 degrees or do you have to mark it yourself?

My motor is bogging in first and second gear but runs really smooth in 3rd, 4th, 5th. Actually we think the motor doesn't have as much power as it should on acceleration. Im going to replace the plugs, rotor, cap and check the timing tonight. I was wondering what degree should the timing be if...

Ok, i wired the knock sensor up. I did use the b16a harness for the plug and ran a wire to the ecu. I drove it around for about 30 minutes and the CEL didn't come on. But the motor still seems way under power. The evap purge control solenoid plug is still disconnected. On the d16z6 there is a...

Im trying to figure out what is wrong with my car and if i did the wiring right. I have been researching all day. (im at work and get paid to do it). I came across this swap story. It is a b18c1 in a 5th gen civic ex. Is this statement also true for a b16a sir II in a 5th gen civic ex. "With...

Does an LSD transmission sound different than a regular one? What i mean by this is when driving it it kinda sound like a skateboard bearing that has dirt in it. Its not to loud though. Just wondering if i should be conserned.

ok, so i got really paranoid last night about this and went outside with a flash light and found out that I put a plug on the knock sensor. I removed it and now i have a stray plug that is the same type as the TA and knock sensor. Sorry guys im new to this. This stray plug has a red wire going...

Sorry to irritate you, Im just in a bad mood because i have been out of a car for a month. Do you think that will fix it?

I put 10w30 in it but my friends was telling me that since it has lsd it might use different oil. Does anyone know? Leon

So i finally got everything done on my swap. I have a 94 civic ex now with a b16a sir II and a y21 with lsd. I actually got to drive my own car!!!! Well I get in, the ecu throws no codes except a knock sensor after a drive for about a minute. But.... It has no power what so ever. My car was...

Did it work when you pulled it, I only reallly need the compressor. Let me know if you want to sell that. Leon

I have a virgin p28. let me know

Thanks guys

I just got my motor installed and i was wondering what the octane rating for the engine is?

anyone?

I have a 94 civic ex. I just put a b16a sir II into it with a p30. I used the original wiring harness for it because it was wired for vtec. I got all the sensors hooked up except for the knock sensor becuase the wiring harness doesn't have it. All the vacumn lines are hooked up except for a real...

Thanks for the links but i have an civic ex. I believe it has a 4 wire plug on the harness. So i was wondering what colors matched to the colors of the o2 sensor becuase the harness side colors are not 2 blacks, green, and white.

how do you know? lol ya i guess i could have done that, but i wasn't sure if the z6 and b16 had the same 02 sensors. still learning. do you know what wires should be connect from o2 to harness?